Fireplace Instructions

  1. Turn the thermostat next to the dining room table to the off position.
  2. Locate the control panel either on the bottom below front glass or the lower right side of the fireplace.
  3. Press in and turn the control knob to pilot.
  4. While continuously pressing the black igniter button, hold in the control knob until you can see the pilot light (blue flame) turn on, located in the fireplace.
  5. Continue holding the control knob for roughly 30 seconds to bring up the thermal pile to temperature.
  6. Turn the control knob to the on position and release.
  7. Turn the thermostat back on.
  8. Set the thermostat to the desired temperature.